2023 Virnig BSGV72 V40 Skeleton Grapple, Two-cylinder Independent Grapple with an open sided design for hauling brush and logs, 8.9” between tines, weighs 885#, And Cylinder Guards. New Grapple w/Wa...
2011 Bron 700 Mulcher, Tyalta Mulching Head, Currently Has 2640 Hours, Cat C18 700HP Engine, Berco Undercarriage D7 with 36" Single Grouser Pads., Engine and Hydraulic Heater for Cold Weather Sta...
New 2023 Virnig BBV72 Open Front Deck Rotary Cutter, 16-25 GPM Flow, Three Blade System, Cut and Remove Trees Up To 3" (6" Model Available). This is a Heavy Duty Built Cutter. Works Great on...
2022 Fecon BH040EXC, Excavator Mulcher, Never Been Used, 15-45 Ton Excavator, 36” Working Width, 30-75 GPM, 160CC Motor, Please Call For More Info and Price....
2018 Fecon FTX150 Steel Track Mulcher Tractor, 395 Hours, 150HP Cummins Engine, 60 GPM Hi-Flow, Fecon Power Management, Many Head Options Available. Please Call For Price and More Info!...
2009 Gyro Trac GT25xp, 1349 actual hours, New head bearing, New teeth, New balance, New tracks (50 hours), New Sprockets, New Style 700HF Head W/500 Hours and Updated Tooth System, Call for price...
2016 Gyro Trac GT35 with 1915 hour, 350 hp Cummins, Captive Tracks just refurbished, Includes pressurized cab with heat and a/c, 700HF plainer style head just refurbished, Winch, Unit just run through...
2021 PRINOTH M450S 1900 Mulcher, New Knife Style Teeth, 74.8” Working Width, around 100 Hours of use, rated for 70-180 HP Carrier, 22.5-66 GPM, very good condition. Please Call For More Info....
Fecon RK8620 Mulcher, Hydraulic Ground Large Body, FGT Rotor, Double Carbide Teeth, Mulch 14”-20” Material, Hydraulic Push Bar. Max Horsepower of 300 HP. Please Call For More Info....
NEW 2024 VIRNIG V70 Disc Mulcher Model TDM60, Efficiently mulch 6-8” diameter trees and quickly remove up to 14” diameter trees. Equipped with a high-torque piston motor, USA made spindle and full...
FAE Soil Mill, Has Less Then 500 Hours, Weighs 12,604 Pounds,This Guy owns Two and he is just down sizing, Roller is currently off for their needs but can easily be reinstalled. Please Call For More I...
2005 Gyro Trac GT25., 7400 hours, ecm changed at 5800 hours., 700 HF plainer style head., Extra filtration on all hydraulic loops., Rebuilt undercarriage., New track drive motors., All hydraulic test ...
2005 Gyro Trac GT25, 7800 hours, 700 HF plainer head, Extra hydraulic filtration, Rebuilt undercarriage, New track drive motors, All hydraulics test good., Very well cared for units...
2007 Gyrotrac GT25XP, 6.7 Turbo Cummins, Hydraulic Push Bar, 3000 Hours, New Wheel Motors, New Tracks and Grousers, New Driver and Axle Bearings and Bushings, Espar Heater, And Hydraulic Winch....
2009 CMI C175 Twister, 5000 Hours, FAE Head, Excellent Undercarriage, New Head Bearings. Teeth are 90%, New Head Skid Plates, Just Fully Serviced, No Leaks....
Harleman Tree Saw HP970HR42, High Performance Hydraulic Rotating Tree Saw, 42” Diameter Saw, Planetary Drive, Very Low Hours. Please Call For More Info....